How to make a bottle cap fidget spinner
L.G: Use precise words to give accurate detail to my reader(s).
If you have a fidgeting problem here is some simple steps that could help you get rid of it and you may have all the materials at your at your house.
This is what you need
6 bottle caps 1 skewer 1 permanent marker 1 glue gun something with one point 1 scissors and if you want you can have finger pads
Step 1: Grab 2 bottle caps put a hole in the middle of both but make sure they can spin on the skewer.
Step 2: Grab the 2 bottle caps that have holes in the middle and use the glue stick to glue them together without mending the holes (make sure that you have someone watching you).
Step 3: Grab 3 more bottle caps and put them round the sides of the centre mark out where you want them to go (permanent marker).
Step 4: put hot glue where you marked with the permanent marker. Now put 3 bottle caps on were the glue is. Now wait for it to dry.
Step 5: Know grab the skewer and stick it through the hole in the middle and cut the outsides that are sticking out with scissors but not to much.
Step 6: Put a blob of glue on both ends of the skewer.
Step 7: If you want fingerpads just hot glue them to both ends of the skewer. Let it dry.
If you have successful fidget spinner it should spin for around about 5 seconds and that should help your fidgety needs.
